- +91-9833300056
- sales@numaticpumps.com
- Mumbai, Maharashtra, INDIA
● Pump Type – Centrifugal, Horizontal, Coupled type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 8 Meter
● Max Flow – 80 Liter per Minute
● Standard Duty – 4 m3/hrs. @ 7 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 130mm
● Pump Type – Centrifugal, Horizontal, Coupled type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 10 Meter
● Max Flow – 166 Liter per Minute
● Standard Duty – 5 m3/hrs. @ 8 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 130mm
● Pump Type – Centrifugal, Horizontal, Coupled type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 14 Meter
● Max Flow – 250 Liter per Minute
● Standard Duty – 9 m3/hrs. @ 8 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 130mm
● Pump Type – Centrifugal, Horizontal, Coupled type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 20 Meter
● Max Flow – 366 Liter per Minute
● Standard Duty – 14 m3/hrs. @ 10 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 130mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 23 Meter
● Max Flow – 416 Liter per Minute
● Standard Duty – 8 m3/hrs. @ 20 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Other Model – (32x25x180) (40x25x150) (40x25x200)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 180mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 40 Meter
● Max Flow – 433 Liter per Minute
● Standard Duty – 10 m3/hrs. @ 21 Meter
● Inlet & Outlet – 32mm x 25mm (Flange end Connection)
● Other Model – (40x25x150) (40x25x200) (80x50x150)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 180mm
● Pump Type – Centrifugal Horizontal Coupled type non self priming Pump
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 35 Meter
● Max Flow – 933 Liter per Minute
● Standard Duty – 40 m3/hrs. @ 20 Meter
● Inlet & Outlet – 80mm x 50mm (Flange end Connection)
● Other Model – (32x25x180) (40x25x200) (80x50x150)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 200mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 45 Meter
● Max Flow – 700 Liter per Minute
● Standard Duty – 28 m3/hrs. @ 32 Meter
● Inlet & Outlet – 80mm x 40mm (Flange end Connection)
● Other Model – (40x25x200) (80x50x200)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 200mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 50 Meter
● Max Flow – 900 Liter per Minute
● Standard Duty – 40 m3/hrs. @ 25 Meter
● Inlet & Outlet – 50mm x 40mm (Flange end Connection)
● Other Model – (80x40x200)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 190mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 64 Meter
● Max Flow – 1260 Liter per Minute
● Standard Duty – 60 m3/hrs. @ 45 Meter
● Inlet & Outlet – 80mm x 50mm (Flange end Connection)
● Other Model – (80x40x200)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 200mm
● Pump Type – Centrifugal, Horizontal, Coupled Type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of SS 316 Material.
● Shaft – SS 316
● Max Head – Up to 75 Meter
● Max Flow – 2500 Liter per Minute
● Standard Duty – 100 m3/hrs. @ 25 Meter
● Inlet & Outlet – 80mm x 50mm (Flange end Connection)
● Other Model – (80x40x200)
● Fluid Temperature – 100° C (Max)
● Seal Type – Single Spring Carbon v/s Silicon with Suitable Elastomer
● Impeller – Fully Opened Type, Diameter 200mm
We are Leading SS 316 Horizontal Centrifugal Pumps Manufacturers and Exporter in India Mumbai. We have SS Monoblock Pump, SS 316 Coupled Pump, SS Sanitary Pump, and SS Self Priming Pump.
We manufactured very wide range of pump with different model and capacity. We have all SS316 Centrifugal Process Pumps series from 0.5 HP up to 20 HP, Horizontal or Vertical, Impeller Type or Screw Type, Monoblock or Coupled Type,
Casting Type or from Rolled Steel Sheet. These Chemical process Pumps are robust, require less maintenance and manufactured as per DIN 34256 and ISO 2858 standards. Acclaimed for precise engineering, these are customized via SS Rolled Steel Sheet.
We have a complete range of SS 316 Centrifugal Process Pumps with High head & High discharge design. Our SS Centrifugal Process pump are front openable Suction casing for easy operation and maintenance. This Pumps Impeller are hydraulically balanced for better efficiency and lower power consumption. Fabricated from SS 316 rolled steel sheet and Investment Die Casting give better surface finish and low liquid friction. Sealing by Mechanical seal of either Carbon, Ceramic, Silicon or Pure Teflon gland packing. Ideally suitable for mild chemical transfer from underground to overhead tank, unloading from tanker, washing and cleaning of parts, Food and dairy products, beverages etc.
All SS 316 Centrifugal Process Pumps are available in Bare Shaft Coupled type and Monoblock design with std. TEFC motors or flameproof motors. Our Pumps are designed to operate up to 110 degree Celsius. Our SS 316 Centrifugal Process Pumps are capable to operate from 20 LPM to 2000 LPM, and lift the material up to 60 meters height.
1. SS Centrifugal Pump is equipped with an open/closed impeller that does not require axial thrust to ensure long service life even under extreme operating conditions.
2. Low flow velocity and optimized flow allow for maximum efficiency.
3. Adapted pump hydraulics and shaft sealing system allow it to work under vacuum.
4. A wide range of sealing variants are available to meet the needs of customers.
5. Final approval and individual inspection of each pump
6. Available in both variant Vertical as well as Horizontal position
7. Each SS Centrifugal Pumps maximum test pressure is 10 kg/cm2.
Buying Stainless Steel (SS) Pumps directly from manufacturers offers several advantages over purchasing through multiple intermediaries. It can help customers get the right pump configuration, technical support, genuine components and better overall value.
Key Benefits
A centrifugal pump is a type of pump that uses centrifugal force to generate pressure and move fluid. It is commonly used in industrial and commercial applications for pumping water, chemicals, and other fluids.
A centrifugal pump works by converting mechanical energy from a motor into kinetic energy in the fluid being pumped. This is achieved by spinning an impeller inside the pump housing, which draws fluid into the center of the impeller and then forces it outwards towards the pump outlet. A single-stage centrifugal pump has a single impeller, while a multistage centrifugal pump has multiple impellers stacked on top of each other to increase the pump’s pressure and flow rate.
In the case of a single-suction centrifugal pump, the fluid is drawn in through a single inlet, while in a double-suction centrifugal pump, the fluid is drawn in through two separate inlets, which can help balance the hydraulic forces acting on the impeller.
Here are some additional useful pieces of information on stainless steel (SS) centrifugal pumps:
Corrosion Resistance: Stainless steel is a popular material for centrifugal pumps because it is highly resistant to corrosion and can withstand harsh chemicals and environments. SS pumps are commonly used in applications where the pumped fluid is corrosive or where hygiene and sanitation are critical.
Maintenance: Centrifugal pumps require regular maintenance to ensure their proper operation and extend their lifespan. Maintenance activities include checking the pump’s alignment, inspecting the impeller and shaft, lubricating bearings, and replacing worn or damaged parts.
Efficiency: Centrifugal pumps are designed for high efficiency, which means that they can move large volumes of fluid with minimal energy consumption. When selecting a centrifugal pump, it’s important to consider the pump’s efficiency and its impact on operating costs.
Cavitation: Centrifugal pumps are susceptible to a phenomenon called cavitation, which occurs when the pressure inside the pump drops below the vapor pressure of the fluid being pumped. This can cause bubbles to form in the fluid, which can damage the impeller and reduce the pump’s performance. Proper pump selection, operation, and maintenance can help prevent cavitation.
NPSH: Net Positive Suction Head (NPSH) is a critical factor in centrifugal pump performance. NPSH is the difference between the pressure at the pump inlet and the vapor pressure of the fluid being pumped. The pump’s NPSH requirement must be met to avoid cavitation and ensure proper pump operation.
Seal Options: Centrifugal pumps require a seal to prevent fluid from leaking out of the pump. There are several seal options available, including mechanical seals, packing seals, and lip seals. The selection of the appropriate seal depends on the specific application requirements, such as the fluid being pumped, temperature, and pressure.
Pump Control: The operation of centrifugal pumps can be controlled by a variety of methods, including throttling the discharge valve, using variable speed drives (VSDs), or adjusting the pump impeller diameter. Proper pump control can help optimize pump performance and reduce energy consumption.
In summary, stainless steel centrifugal pumps are widely used in many industrial and commercial applications due to their high corrosion resistance, efficiency, and low maintenance requirements. Proper pump selection, operation, maintenance, and control are critical for achieving optimal performance and avoiding problems such as cavitation and seal leakage.
Stainless steel (SS) centrifugal pumps are a type of centrifugal pump that uses a rotating impeller to move fluids. The impeller is mounted on a shaft and rotates at high speed, creating a centrifugal force that draws the fluid into the pump and then discharges it through a volute or diffuser.
SS centrifugal pumps are made of stainless steel, which makes them highly resistant to corrosion and ideal for use in applications where the fluid being pumped is aggressive or corrosive. They are commonly used in the following industries and applications:
Food and Beverage: SS centrifugal pumps are used to move food and beverage products such as milk, juice, beer, wine, and syrup through processing and packaging operations.
Pharmaceutical: SS centrifugal pumps are used to transfer and circulate pharmaceutical products such as vaccines, drugs, and biological fluids through production and distribution systems.
Chemical: SS centrifugal pumps are used in chemical processing plants to move acids, alkalis, solvents, and other corrosive or aggressive chemicals.
Water Treatment: SS centrifugal pumps are used in water treatment plants to move water through filtration, disinfection, and distribution systems.
Marine: SS centrifugal pumps are used in marine applications such as ballast systems, cooling systems, and bilge pumping.
HVAC: SS centrifugal pumps are used in heating, ventilation, and air conditioning (HVAC) systems to circulate hot or cold water through building systems.
Mining: SS centrifugal pumps are used in mining operations to move slurry, water, and chemicals through processing and transportation systems.
SS centrifugal pumps are available in various types, sizes, and configurations to meet different application requirements, including flow rate, pressure, temperature, and viscosity. Proper pump selection and maintenance are critical for achieving optimal performance and extending the pump’s lifespan.
Thank you for visiting our website and your interest in our products and services. If you have any further questions or would like more detailed please feel free to contact us.
A stainless steel centrifugal pump is a type of centrifugal pump with wetted components made mostly of stainless steel. These stainless steel centrifugal pumps are widely utilized in a variety of sectors for applications requiring the pumping of corrosive or aggressive fluids, as well as procedures requiring cleanliness and hygiene, such as food and beverage, pharmaceuticals, chemicals, and water treatment. Stainless steel centrifugal pumps come in a variety of sizes and designs to accommodate varying flow rates and head requirements. To guarantee the pump’s best performance and dependability, consider variables such as the specific fluid to be pumped, the flow rate, the necessary head, the operating temperature, and other application-specific characteristics when selecting a Stainless Steel centrifugal pump.
Thank you for visiting our website and your interest in our products and services. If you have any further questions or would like more detailed please feel free to contact us.
Estd. 2014 © 2026 Numatic Pumps (All rights reserved)
Estd. 2022 © 2026 Unico Pumps (All rights reserved)
