PP Monoblock Pump PM-0.5

Polypropylene Monolock Pump Manufacturers

● Pump Type – Centrifugal, Horizontal, Monoblock type, Non Self Priming Pump
● Pump Material – Casing, Impeller and Back Plate is Made of PP (Polypropylene) Material
● Shaft – EN 8 with Ceramic Sleeve
● Max Head – Upto 12 Meter
● Max Flow – 150 Leter per Minute

● Negative Suction – Maximum 3 Meter with foot valve
● Inlet & Outlet – 25 mm x 25 mm (Flanged end Connection)
● Motor Specification – 0.5 HP, NFLP, 2800 RPM, 50 Hz, 3 Phase.
● Fluid Temprature – 70° C (Max)
● Seal Type – PTFE (Teflon) Bellow with Ceramic Vs GFT Facings, Ceramic Sleeve
● Impeller – Semi Open Type

Polypropylene Monoblock Pump

We are a leading Polypropylene Monoblock Pump Manufacturer in Mumbai Gujarat India which are used in Highly Corrosion Chemicals and Acids. These Polypropylene Monoblock Pumps are Plastic Pumps or also called PP Monoblock Pumps made by solid injection moulded Machines also called Glass-filled polypropylene (GFP). Besides This, we also Manufacturer in PVDF Monoblock Pumps and SS Monoblock Pumps. These pumps incorporate a robust design to handle highly corrosive fluids including corrosive slurries.

Over years of experience, Numatic Pumps has developed corrosion resistant pumps for a wide range of applications. The material of construction is specially selected depending on the specific application. This ensures the highest corrosion resistance and stability. Polypropylene Monoblock Pump shaft sleeve and Mechanical Seal are selected as per media to suit the service condition.

PP Monoblock Pumps are Ideal for the transfer of corrosive liquids, pharmaceutical products, food and dairy products, chemical transfer and filtration and are mainly used in Electroplating and CED Coating Industriel etc. These pumps are specially designed to give high head & capacity. Std. pumps are available with PTFE gland packing and NFLP motor. A flameproof motor can be supplied on request.
For different fluids and chemicals containing suspended particles and slurry special seals with suitable faces are Provided. Polypropylene Monoblock Pumps have a Back Pull-out construction for easy maintenance without disturbing the piping. The Metallic armour provides maximum protection against suction and the discharge nozzles of the pump. Therefore Polypropylene Monoblock Pump can handle maximum misalignment distortion and piping loads.

Polypropylene Pump

If you’re looking for a Polypropylene Monoblock Pump, Numatic Pumps provide a lot of options. Numatic offers a wide selection of Polypropylene Monoblock Pumps, ranging from 15LPM to 1500LPM. Polypropylene Monoblock Pumps are the most commonly used Pumps globally because of their compact design and material properties which are suitable for almost 80% of the acid and chemicals. Polypropylene is the most common material used in the pumping industry. PP is the chemical term for polypropylene. The chemical resistance of polypropylene plastic is well-known. Fresh Water, Salt Water, DI Water, Citric Acid, Fluosilicic Acid, Formaldehyde, Muriatic Acid, Nitric Acid, Phosphoric Acid, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide, Sulfuric Acid, and many more chemicals are widely used with polypropylene monoblock pumps.


Our Polypropylene Monoblock Pumps are created and manufactured by a team of technical professionals that have a thorough understanding of the components and functional aspects of these pumps.

Range of Polypropylene Pumps:

* Polypropylene Magnetic Drive Pumps
* Polypropylene Monoblock Pumps
* Polypropylene Coupled Pumps

* Polypropylene Self Priming Pumps
* Polypropylene AODD Pumps
* Polypropylene Motorised Barrel Pumps

* Polypropylene Pneumatic Drum Pumps
* Polypropylene Vertical Pumps