NUMATIC PUMPS

PP Monoblock Pump PM-2

PP Polypropylene Pump

● Pump Type – Centrifugal, Horizontal, Monoblock type, Non Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of PP (Polypropylene) Material.
● Shaft – SS 316 with Ceramic Sleeve
● Max Head – Upto 18 Meter
● Max Flow – 483 Leter per Minute
● Standard Duty – 21 m3/hr @ 10 Meter
● Inlet & Outlet – 40mm x 32mm (Threaded end Connection with Flange)
● Motor Specification – 2 HP, NFPL, 2800 RPM, 50 Hz, 3 Phase.
● Fluid Temprature – 70° C (Max)
● Seal Type – PTFE (Teflon) Bellow with Ceramic and GFT Facings
● Impeller – Semi Open Type

PP Acid Circulation Pump

We are the leading Manufacturer of Non Corrosive pumps in India. Non Corrosive Centrifugal Pumps are made of PP, PVDF, PFA, FAP Material to resist Acidic Corrosive and Aggressive Acid Chemicals and Liquids. The accessible range of Non Corrosive Pumps is available in different modified specifications as per the varied supplies of appreciated customers. Anti Corrosive Pump is used to Transfer, Circulate, Loading and Unloading Corrosive and Non-Corrosive liquids or elements with high efficiency which is suitable for corrosive liquids. We are a manufacturer in providing a wide range of PP Pump, PP Monoblock Pump with the finest quality in India, Ahmedabad, and Gujarat. PP Pump is a solitary piece unique design covered with an open and closed type of impellers, which are designed for vastly corrosive chemicals in which metal pumps do not work.


Pumps are used to circulate and transmit various quantities of acid from one piece of equipment to another. Vertical Submerged and Horizontal Pumps are the most common types of pumps utilised in Acid Circulation Pumps.


Vertical Centrifugal Acid Circulation Pumps


For a variety of reasons, submerged vertical centrifugal pumps for severe acid service have become the industry standard. Because the pumps are mounted in a closed vessel, all leaks are contained within the vessel and do not endanger employees. Another advantage is that the shaft seal does not come into contact with the acid and instead functions as a gas barrier. This design reduces the problem of shaft seal leakage, which is common with horizontal centrifugal pumps.


Horizontal Centrifugal Acid Circulation Pumps


Pumps for acid circulation pump service should always be chosen with the acid concentration, temperature, and service in mind. Horizontal centrifugal acid circulation pumps are infrequently utilised in acid plants for circulation duties. This is the job of the vertical submerged centrifugal pump.
Horizontal centrifugal pumps, on the other hand, are frequently used to move, load, and unload concentrated acids. PVDF is commonly used in the fabrication of the casing and impeller. A packing or mechanical seal can be used as the shaft seal. If packing is employed, the operator must be aware that some leakage across the seal is necessary and that if the packing fails, there is a risk of more serious leaks and acid spray.
Weak acid pumps are typically horizontal centrifuges. Plastic building materials are often more suited for this service than iron pumps. Polymers are resistant to a broad variety of concentrations and are less costly than some of the rare metals needed to withstand certain acid concentrations. Rubber-lined pumps can also be utilised in mild acid service depending on the fluid being pushed.
Magnetic drive pumps made of appropriate materials can be utilised to limit the likelihood of a leak at the pump seals.
Several manufacturers and providers of horizontal centrifugal pumps are acid-resistant. The key is proper material selection and specification of the appropriate type of seal.

Acid Transfer Pumps

Our Acid Transfer Pumps are specifically built for highly corrosive substances where metal is either not advised or is prohibitively expensive. Acid Circulation Pumps have a horizontal radially split one piece volute casing design with a semi-open impeller single entry single stage for smooth operating performance against corrosion per industry requirements. Acid Circulation Pumps and Acid Transfer Pumps are manufactured by Numatic Pump. Our Polypropylene Pumps and PVDF Pumps are specifically built for highly corrosive substances where metal is not advised or is prohibitively expensive. A high alumina ceramic sleeve is used to protect the shaft of Polypropylene Pumps and PVDF pumps from corrosion and abrasion. Pump leakage is prevented by a mechanical seal, and the best cast iron heavy duty oil-lubricated bearing housing aids in pump strength.