NUMATIC PUMPS

PP HCL Monoblock Pump

[products ids=”2145,2149,2150″]

PP HCL Monoblock Pump

Seeking a pump for the Acid, Numatic Pumps has many choices!  From 15 LPM to 1200 LPM.

If pumping the Acid at room temperature, it is recommended to go with a Centrifugal Acid Pump made up of PP (Polypropylene) or PVDF (Polyvinylidene fluoride), Encapsulated Impeller, Viton O-Ring, and either a Carbon or Mica Teflon Bushing. The Acid Pump can also be heavy depending on the concentration and temperature. If the specific gravity is more than 1.1, a trimmed impeller is absolutely necessary to prevent decoupling or overloading the motor.

Pumping Sulphuric Acid, Hydrochloric Acid or Nitric Acid.

The most widely used Acid in industry, Sulphuric Acid, Hydrochloric Acid or Nitric Acid is utilized in almost every market sector in the world. This Three Acid are aggressive acids, available in several concentrations from chemical manufacturers, or where a large quantity is used, the acid may be produced on site. Depending on the concentration, Sulphuric Acid, Hydrochloric Acid or Nitric Acid has an SG ranging from 1–2. The chemical can be either clear or cloudy and is very stable and non-flammable.

Example applications

  • Production of hydrochloric, nitric and phosphoric acids

  • Phosphate fertilizer, where sulphuric is converted into phosphoric acid

  • Petroleum production where impurities are removed by the Acid

  • Paper industries where Sulphuric Acid is used as part of chlorine dioxide generation and pH correction

  • Sugar bleaching

  • Wastewater treatment

  • Synthetic textiles production such as cellulose fibres

  • Pickling of metals

  • Catalyst agent for crude oil and petroleum production

  • Agrichemicals for potato crop spraying

  • Production of Rayon as a reagent with the pulped wood product